Home > Product > Flow Meter > Rotameter

Plastic Rotameter Flow Meter

Plastic Rotameter Flow Meter
Plastic rotameter flow meter Introduction The plastic water rotameter flow meter can be installed in any position without affecting the accuracy. It can be installed in horizontal or vertical piping, even upside down. Z-60, Z-65 can be equipped with upper and lower limit alarm switch. Features...
Product Details:

Plastic rotameter flow meter

Introduction

The plastic water rotameter flow meter can be installed in any position without affecting the accuracy. It can be installed in horizontal or vertical piping, even upside down. Z-60, Z-65 can be equipped with upper and lower limit alarm switch.


Features


1) Low installation costs with easy mounting .
2)Long operation life with durable construction.
3)Precision molding enables high repeatability.
4)White back on the flow tube allows for better visibility of the float increasing reading accuracy .
5)Compact bodies require minimal panel space freeing valuable space.


Applications


•Medical equipment
•Air samplers
•Gas analyzers
•Pollution monitors
•Chemical injectors
•Cabinet purging

QQ图片20170922155725.png

HTB1T83aKXXXXXcRXpXX760XFXXXA.png

Modcl

Flowrate

(water 20°C)

L

mm

D1

Condition

Socket

FBSP

thread

 

 

 

 

 

 

LZB-15S

2-20L/h

3-30 L/h

4-40 L/h

5-50 L/h

6-60 L/h

10-100 L/h

16-160 L/h

25-250 L/h

40-400 L/h

50-500 L/h

60-600 L/h

100-1000 L/h

 

 

 

 

 

 

280

 

 

 

 

 

 

Φ20

 

 

 

 

 

 

G½“

 

 

 

 

 

 

Accuracy:

±4%

 

 

 

Pressure:

1MPa

 

 

 

Temp.:

0-60

LZB-25S

100-1000L/h

160-1600 L/h

250-2500 L/h

300-3000 L/h

 

380

 

Φ32

 

G ¾

LZB-40S

(with guiderod)

0.4-4m³/h

0.6-6 m³/h

1-10 m³/h

 

 

420

 

 

Φ50

 

 

None

 

 

LZB-50S

 

 

0.4-4 m³/h

0.6-6 m³/h

1-10 m³/h

 

 

 

435

 

 

 

Φ63

 

 

 

G1½“

1.6-16 m³/h

(with guiderod)

Tips:

1. There are three connection types: BSP thread type, socker-end type,and flange type.(This structure sketch takes socket-end connection type as example.)

2. Flowmeter is used for measuring the flow rate of liquid or air.

Model

  Flowrate (Water 20oC)

L 

mm

D1

 

Condition

Socket

FBSP

Thread

LZB-15S 

(with guiderod)

5-50L/h            6-60L/h    10-100L/h  16-160L/h 25-250L/h 40-400L/h 60-600L/h 100-1000L/h

 

 

 

200

 

 

 

Φ20

 

 

 

G½“

 

 

 

 

 

 

 

 

 

 

 

 

Accuracy:    ±4%

 

 

Pressure: ≤1MPa

 

 

 

Temp.: 0oC-60oC

LZB-25S 

(with guiderod)

100-1000L/h 160-1600L/h 250-2500L/h 300-3000L/h

 

 

230

 

 

Φ32

 

 

G¾

LZB-32S      (with guiderod)

400-4000L/h 600-6000L/h

288

Φ40

G1

LZB-50S      (with guiderod)

0.4-4m³/h 0.6-6 m³/h  1-10 m³/h 1.6-16 m³/h

 

 

341

 

 

Φ63

 

 

G1½

LZB-65S      (with guiderod)

3-16m³/h   5-25m³/h   8-40m³/h  10-50m³/h    12-60m³/h

 

 

430

 

 

Φ75

 

 

G2

LZB-80S      (with guiderod)

3-16m³/h   5-25m³/h   8-40m³/h  10-50m³/h 12-60m³/h

 

 

533

 

DN80   flange

 

None

LZB-100S    (with guiderod)

8-50m³/h 10-60m³/h 14-90m³/h 18-120m³/h 18-150m³/h 20-180m³/h 20-200m³/h 20-220m³/h

 

 

 

555

 

DN100  flange

 

 

 

None

LZB-125S    (with guiderod)

DN125   flange

LZB-150S    (with guiderod)

DN150  flange

(1)Before installation, take out foam
supports in the tube carefully. Make sure the rubber ring is installed correctly on the indentation.
(2)This Flowmeter can be equipped with ABS pipe or PVC pipe by using special glue to connect. It also has flange or thread connection.
(3)This flowmeter should be installed
vertically and be convenient to read the scale. When reading, keep the sight and the float horizontal.(General 
standard: the best flow to be measured 
should be 50%~70% of max flowrate. 
Try not use the maximum value.)
(4)The straight lengths of both inlet and outlet pipes connected with the flowmeter should be more than five times of the flowmeter’s length.
(5)The pressure of liquid should be stable. If the pressure of liquid is not 
stable, it will lead the wave of floater and cannot measure correctly, then a buffer or setting adjuster should be set above the flowmeter.

 

Hot Tags: plastic rotameter flow meter, manufacturers, suppliers, wholesale, agent, good price, sale
Related Products
Feedback: